HP Designjet 130 Printer series
Printers for creative professionals—the affordable
HP Designjet 130 multi-format printing systems create
fade-resistant, photo-quality images with consistent colors
for professional photos, prints and proofs.
Color images that last
Postcards to posters
• Fade-resistant, photo-quality images. Proprietary
dye-based HP Vivera inks are carefully engineered
to work flawlessly with all parts of the printing
systems so you achieve rich, vibrant color and
extraordinary photo image quality with exceptional
• Ideas big and small—no more cutting and pasting.
The standard tray holds up to 70 sheets as small as
a postcard or as big as a poster (18 x 24 in). Extra-
wide front and rear paths allow oversize output up
to 24 x 64 in; standard roll feed supports printing
up to 24 in x 50 ft and allows you to switch between
loaded media options without intervention.
1
fade-resistance. Graphic designers and professional
photographers can rest assured that the images they
create will maintain their impact.
• Media that shows off your ideas. The HP Designjet
130 Printer series can handle media weights up to
80 lb (300 g/m2), as well as thick or rigid media up
to 15 mil. Choose from a variety of media finishes,
including gloss, satin and matte.
• Rich color depth and minimal dot visibility. The
six-color HP writing system delivers a wide range
of colors, deeper blacks, continuous tones and
superior gloss uniformity. A four picoliter ink drop
size maintains fine detail reproductions, especially in
dark areas, and smooth tonal transitions.
Time to design
• See reliable, consistent color from print to print.
Print at speeds up to 4 minutes per page (mpp) for
B-size and up to 12 mpp for an D-size color image
in Normal mode, with fast color stability. Proofs and
prints can be reviewed and approved in real time.
Reliable color
• See reliable, consistent color from print to print. The
HP Designjet 130 Printer series features automatic
closed-loop color calibration to provide consistent
color, print to print and printer to printer.
• More time creating. In-house printing for oversize
output eliminates delays and shortens project
timelines. Reliable, modular HP ink cartridges
and printheads require minimal user intervention
—further enhancing cost-effectiveness and efficiency.
• Full color workflow support. Optimized Macintosh
and Windows® drivers provide key features for
creative professionals, including RGB ICC profiles
and full Apple ColorSync support. Optional Adobe®
PostScript® 3™ software RIP provides robust color
management and proofing options for the CMYK
workflow.
1 Wilhelm Imaging Research, Inc. concluded that prints made with HP No. 85 ink
cartridges and HP Premium Plus Photo papers may be displayed indoors under glass
for 82 years before noticeable fading and staining occur.
• Making professional color results simpler. HP’s
free on-line knowledge center provides illustrated
step-by-step instructions specific to your application,
computer and workflow. And HP’s custom color
profiling service provides high-quality ICC media
profiles for professionals whose work demands
superior color accuracy.
As a creative professional, you need more than
reliability, performance and value. Your world is
all about color. That’s why HP has implemented
technologies and solutions that deliver the color
quality, consistency and control you need for a
superior color experience.
Color solutions for your workflow
Color technology by HP
RGB or CMYK. Printing or proofing. Pleasing color
or accurate color. With the HP Designjet 130 printing
system, you can choose the solution that best fits your
needs, your workflow and your environment.
Inks and media deliver fade resistance and stability
New, dye-based inks, combined together with HP papers,
produce images that stabilize in minutes vs. hours and last
for years. HP inks, media and printers are designed together
for results that do justice to your ideas.
HP Designjet 130 drivers
HP Designjet 130 Printer series
(using HP Proofing Semi-gloss Paper)
Optimized Mac and Windows drivers deliver
outstanding color output for photographers or
designers printing images in an RGB workflow.
Support for RGB ICC profiles means you have the
choice of managing color in the applications or via
ICM profile or ColorSync tools.
The drivers also allow you to balance color channels
individually when you need one last tweak.
EFI Designer Edition RIP for HP
HP color layering technology
The EFI Designer Edition RIP, tailored for HP printers
offers a powerful, yet cost-effective digital proofing
system that allows full control over digital proofing
needs and saves hassle, time and money. Together, EFI
and HP enable designers, photographers and other
creative professional to easily generate proof quality
prints with sharp detail, color accuracy and smooth
tonal transitions.
Like artists creating new colors by mixing the standard paints
on their palettes, multi-layering technology
uses the basic CMYKcm palette to achieve a much broader
range of printable colors.
By layering ultra small (4 pl) drops within a single dot, HP
Designjet 130 printers produce smoother gradations between
tones for virtually grain-free images.
Third-party RIPs
HP has worked with virtually all the leading RIP
vendors in digital photography, large-format printing
and pre-press proofing fields to ensure you can choose
the solution that best matches your color workflow.
Automatic color calibration
The automatic closed-loop color (CLC) calibration process
enables consistent and accurate color reproduction.
The CLC process is based on measuring, via a color sensor,
reflected energy from primary color tiles that are illuminated
with a narrow-bond light source. The process works in much the
same way as a classical densitometer. The printer generates a
target, scans the pattern and adjusts based on the results.
3
HP Designjet 130 Printer series
Ordering information
Technical specifications
Product
C7791C
C7791H
Accessories
Q1246B
C7797A
Q1264A
J7934G
UC217E
UC218E
Q6643D
Ink supplies
C9420A
C9421A
C9422A
C9423A
C9424A
C5019A
C9425A
C9426A
C9427A
C9428A
C9429A
C5016A
Media
HP Designjet 130 Printer
Print speed
HP Designjet 130r Printer
Up to 4 min/page on B-size glossy media, up to 11.9 min/page on D-size glossy media
Normal
Best
Up to 6 min/page on B-size glossy media, up to 17.5 min/page on D-size glossy media
HP Designjet 100/500/800 24-in Stand & Bin
HP Designjet Standard Roll Feed (included with 130r)
HP Designjet 110/120/130 Spindle Accessory
HP Jetdirect 620n Fast Ethernet Print Server
ICC profile (creation of 1 profile)
Printing
Up to 2400 x 1200 dpi
Print resolution
Margins
0.2 x 0.47 x 0.2 x 0.2 in
HP Thermal Inkjet
Technology
HP Color Layering technology, PhotoREt IV
Dye-based HP Vivera inks
Technology resolution
Ink types
ICC profile (creation of 3 profiles)
EFI Designer Edition 5.1 RIP for HP (XL) Intl
Cyan, magenta, yellow, black, light cyan, light magenta
4 pl
Ink colors
Ink drop
HP 85 Cyan Printhead
HP 85 Magenta Printhead
HP 85 Yellow Printhead
HP 85 Light Cyan Printhead
HP 85 Light Magenta Printhead
HP 84 Black Printhead
HP 85 Cyan Ink Cartridge (28 ml)
HP 85 Magenta Ink Cartridge (28 ml)
HP 85 Yellow Ink Cartridge (69 ml)
HP 85 Light Cyan Ink Cartridge (69 ml)
HP 85 Light Magenta Ink Cartridge (69 ml)
HP 84 Black Ink Cartridge (69 ml)
6 (1 each cyan, magenta, yellow, black, light cyan, light magenta)
0.002 in (0.04 mm)
Print heads
Minimum line width
Media
70-sheet input tray, front manual single-sheet feed, rear manual path for thick media, standard roll
feed with auto cutter (130nr only)
Handling
Bond and coated paper (coated, heavyweight coated, plain), photo (gloss, high-gloss, semi-gloss,
satin, matte), proofing (high-gloss contract, semi-gloss contract, matte)
Tray 1: 17 to 40 lb (65 to 150 g/m2); manual single-sheet feed: 17 to 40 lb (65 to 150 g/m2);
rear path: up to 80 lb (300 g/m2); roll feed: 17 to 40 lb (65 to 150 g/m2)
Tray 1: 3 x 5.6 to 18 x 24 in; manual single-sheet feed: 4.3 x 8.1 to 24.6 x 64 in;
rear path: 4.3 x 8.1 to 24.6 x 64 in; roll feed: up to 24 in
Types
Weight
Size
Q1961A
Q1962A
C6029C
Q1412A
C6019B
Q1404A
C1860A
Q1396A
Q5488A
Q5486A
Q5487A
Q7920A
Q5491A
Q1426A
Q1420A
Q5492A
Q1968A
Q1967A
HP Inkjet Coated Paper, C+, 100 sheets
HP Inkjet Coated Paper, D+, 100 sheets
Tray 1: up to 8 mil; envelopes: up to 15 mil; front path: up to 8 mil; rear path: up to 15 mil; roll
feed: up to 8 mil
Thickness
HP Heavyweight Coated Paper 24 in x 100 ft
HP Universal Heavyweight Coated Paper 24 in x 100 ft
HP Coated Paper 24 in x 150 ft
HP Universal Coated Paper 24 in x 150 ft
HP Bright White Inkjet Paper 24 in x 150 ft
HP Universal Bond Paper 24 in x 150 ft
HP Premium Plus Gloss Photo Paper 24 in x 50 ft
HP Premium Plus Gloss Photo Paper, B+, 25 sheets
HP Premium Plus Gloss Photo Paper, C+, 20 sheets
HP Premium Plus Satin Photo Paper 18 in x 50 ft
HP Premium Plus Satin Photo Paper 4 in x 50 ft
HP Universal High-gloss Photo Paper 24 in x 100 ft
HP Universal Semi-gloss Photo Paper 24 in x 100 ft
HP Matte Photo Paper, B+, 50 sheets
A1, A1+, A2, A3, A4, B2, B3, B4, letter, legal, tabloid, C, D, D+, envelopes
Standard sizes
Connectivity
USB 1.1 (USB 2.0 compliant), Centronics parallel IEEE-1284 (ECP compliant), 1 EIO slot.
Compatible HP Jetdirect LAN cards
Interfaces (standard)
Interfaces (optional)
Print languages
PCL 3 GUI RGB 24-bit Contone; optional: Adobe PostScript 3 via software RIP
PCL 3 GUI Windows driver, Microsoft Windows drivers (Vista®, XP, 2000) including support for
AutoCAD 2000 and AutoCAD 13 - 14 drivers, USB and ECP drivers, Raster driver for Mac OS X
v10.3, v10.4, v10.5
Drivers (included)
Dimensions (w x d x h)
Printer
130: 41.3 x 16.3 x 8.7 in (1050 x 415 x 220 mm), 130r: 41.3 x 21 x 8.7 in (1050 x 535 x 220 mm)
130: 41.3 x 35.4 x 8.7 in (1050 x 900 x 220 mm), 130r: 41.3 x 40.1 x 8.7 in (1050 x 1020 x 220 mm)
46.9 x 21.5 x 19.5 in (1192 x 545 x 493 mm)
Maximum
Shipping
Weight
HP Matte Proofing Paper 24 in x 100 ft
HP Matte Proofing Paper, B+, 100 sheets
Printer
130: 48.5 lb (22 kg), 130r: 50.7 lb (23 kg)
130: 74.6 lb (33.8 kg), 130r: 81.2 lb (36.8 kg)
Shipping
HP Care Pack Services
What’s in the box
HP Designjet 130
Printer
U3477E
UC744E
UC217E
UC218E
HP 3-Year Next Business Day Onsite Service
HP Designjet 130 Printer, printheads (6), ink cartridges (6), input/output tray, input tray cover, HP media
samples, documentation and drivers CD, quick reference guide, setup poster, USB cable, power cord
HP Designjet 130 Printer, standard roll feed, printheads (6), ink cartridges (6), input/output tray,
input tray cover, HP media samples, documentation and drivers CD, quick reference guide, setup
poster, USB cable, power cord
HP Installation Service with Network Setup
HP Color Profiling Service - 1 Profile
HP Color Profiling Service - 3 Profiles
HP Designjet 130r
Printer
More HP media sizes and weights available at:
Environmental ranges
Operating temperature
41 to 104° F (5 to 40° C)
Recommended operating temperature
Storage temperature
Operating humidity
Recommended humidity
Storage humidity
59 to 86° F (15 to 30° C)
-4 to 131° F (-20 to 55° C)
20 to 80% RH
25 to 75% RH
0 to 95% RH
Acoustic
Sound pressure, active
Sound pressure, standby
Sound power, active
Sound power, standby
50 dB(A)
37 dB(A)
6.2 B(A)
5.4 B(A)
Power consumption
Maximum
65 watts
Standby
17 watts
Power requirements
Input voltage 100 to 240 V ac (+/- 10%) auto ranging, 50/60 Hz (+/- 3Hz), 2 amp
maximum
© Copyright 2005, 2008 Hewlett-Packard Development Company, LP. The information contained herein is subject
to change without notice. The only warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft, Windows, Windows Vista and Windows XP are U.S. registered trademarks of Microsoft Corporation.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Adobe PostScript 3 is a trademark of Adobe
Systems Incorporated. PANTONE is the property of Pantone, Inc.
Certification
Safety
IIEC 950-compliant, EU LVD and EN60950 compliant, CSA certified for US and
Canada, Mexico NOM-1-NYCE, Argentina IRAM, China CCC, Singapore PSB, Russia
VNIIS, Poland ELTEST, Korea KTL
Compliance for Class B products, Class A when connected to LANs, EU (EMC
Directive), USA (FCC rules), Canada (DoC), Australia (ACA), New Zealand (MoC),
China (CCC), Japan (VCCI), Class A for Korea (MIC), Taiwan (BSMI)
Electromagnetic
ENERGY STAR® qualified models see:
Warranty
One-year warranty
For more information, visit our website at
5982-5478ENUC, January 2009
|